PD1325GL cutting metal and nonmetal laser machine

PD1325GL cutting metal and nonmetal laser machine


Applicable industry:mainly used for advertising industry(stainless steel and acrylic),sheet metal industry(carbon steel),packge industry(die board),etc.
Applicable materiales:acrylic,stainless steel,carbon steel,MDF,die board,etc.

  • Working area 1300*2500mm
    Machine area 3560*2000*1240mm
    Laser power 260w or 150w(special mix cut)
    Laser tube type Sealed CO2 glass laser tube
    Engraving speed 0-1000mm/min
    Laser tube life 10000hours
    Cutting speed 0-400mm/s
    Reposition accuracy <0.01mm
    Resolution 0.025mm
    Consuming power ≤1500W
    Forming text 2mm chinese characters,1mm English
    Cooling type Water pump
    Energy regulation 0-100% control, stepless adjustable internal software 0-100%
    Working temperature 0-45℃
    Working humidity 5%~95%
    Working platform The blade platform(optional cellular)
    Driving system Panasonic servo motor
    Supported file format PLT、DST、DXF、DWG、AI、LAS
    Compatible software AutoCAD、CorelDRAW
    Power supply AC220V/50HZ

  • 1.    Mixed-cut:Metal steel such as stainless steel,carbon steel,and nonmetal such as acrylic,wood,etc.

    2.    Good stability:optimized the nc system control,it can meet the precision parts processing,stable dynamic performance,also can work for long hours.

    3.    The cutting section with good quality:mechanical follow-up cutting head system,cutting head always follows the material to keep the cutting point location unchanged,which insures smooth cutting section without processing again.It can adopt to flat or curved surface sheet cutting.

    4.    Simple structure,easy opreation,stable laser device and now maintenance cost;


    1.    Can I make money with a laser ?
    Yes! Personalization and customization of products is in high demand. Adding a laser engraving service to your current operation is an excellent way to reach possible new customers as well as offer a valued service to your current client base.
    2.    What types of graphics can I engraving and cut
    You can engrave scanned photos, logos, bitmaps, other images, text, and AutoCAD files. Essentially, if you can print it, you can engrave it. 
    To cut, you will need a vector based graphic, such as an .eps or Illustrator file. 
    Keep in mind the higher the quality of the graphic you're working with, the better your engraving results.
    3.    Is the laser safe to operate?
    Yes, the laser is completely safe to operate. It is a Class 2 laser - 1mW CW Maximum 600-700 nm, which means that the laser is secured with interlock devices so it will not run with the doors of the system open. No special safety gear is required to run the laser.

    4.    How much does it cost to perate the laser?
    The cost of operating the laser can be easily figured out by plugging your electricity rates into the following formula using even our highest wattage laser, the 120 watt.
    Typical Max power consumption = 1560 Watts (This assumes full power, constant laser on.) If power costs $0.075/KWH in your area, it is costing $0.117/hour to operate the laser. Or, about 12 cents per hour, or 96 cents per eight hour day. (1560 x .075)/1000 = .117

    We are pleased to test and certificate even your material for its laser cutting ability.

  • One sample: cutting metal

    Two sample:Cutting acrylic

    Three sample: cutting MDF

Address:Room 303,Kaibeite Building Tower B,No 15 Huaxin Road,Licheng District,Jinan city,shandong,china.


Note: Please fill out the form below in detail. Fields marked with * are required.

* Your Name:
* E-mail:
* Detailed Requirements:
Captcha: Can't see? ClickCan't see?

Shandong Rongbo CNC machine Co.,Ltd    Address:Room 303,Kaibeite Building Tower B,No 15 Huaxin Road,Licheng District,Jinan city,shandong,china.